Procurement - Quality Management (QM)

Procurement using Quality Management
If a material in Purchase Order has Quality management active, when a Goods Receipt is made the stock gets posted to inspection stock. An inspection lot is created usually automatically. The properties of the inspection lot depend on the following settings,

• Inspection Lot Origin
• Inspection Type
• Inspection Settings in the material master record

An inspection lot, forces a user to carry out an inspection. The inspection needs to be carried out as per the Quality inspection plan. The inspection results are recorded for each of the characteristics. Based on the inspection results, a usage decision is made which basically completes the inspection process.

SAP Process Flow:

• Purchase Order (ME21N)
• Goods Receipt (MIGO)
• Result Recording (QE51N)
  o Fill up the selection parameters and execute.
  o Select desired inspection lot
  o Select the inspection operation
  o Enter results for inspection characteristics
  o Close the inspection characteristics
  
• Usage Decision (QA11)

The usage decision specifies whether the inspected goods are accepted or rejected for use. Usage Decision creates a material document. It results in a stock being posted as unrestricted stock, blocked stock or as returns delivery to the vendor. The stock can be posted as returns delivery to the vendor only if the vendor payment for the purchase order is still pending. Else it needs to be posted as blocked stock.

Usage decision is a final step in an inspection process. Once a usage decision has been made you can not change the inspection results.

Note:
If the inspection lot created after Goods Recipts (MIGO) is not released, an additional step will be required. By T Code – QA02 the inspection lot can be released so that results recording can take place by transaction QE51N.

Master Data Settings:

• Material Master
• Quality Info Record
• Quality Inspection Plan

Evaluated Receipt Settlement - ERS

Evaluated Receipt Settlement (ERS)

Evaluated Receipt Settlement is an alternate way of processing vendor invoices. In this method, instead of vendor submitting the invoices for payment, the company on its own settles the vendor liabilities and presents a payment statement. This method of payment takes the data based on purchase orders and delivered quantities to arrive at the vendor payment amount.

The ERS process gives best results when pricing and goods receipt remains consistent with the Purchase Order created.

ERS has gained popularity owing to the following obvious advantages,

• Reduction in manpower to process invoices
• Timely payment to vendors

SAP Process Flow:

• PO (ME21N) – A tax code should be maintained in the purchase order.
• Goods Receipt (MIGO – Mvt Type – 101)
• ERS Settlement (MRRL) - One can do test run to see the details and thereafter uncheck the test run and do a final run.
• Payment Run
• MR90 (Output messages in logistics invoice verification) – in case there is a requirement to re-send the ERS output message to the vendor.
  Purchase orders which are ERS relevant can only be settled through Evaluated Receipt Settlement transactions (MRRL) in Logistics invoice verification.

To cancel an invoice created through ERS you should first cancel the Goods Receipt and then create invoice through MRRL run, so that accounting entries can be reversed. In a similar manner credit memos can also be created using ERS. If an invoice has already been posted for a goods receipt and goods have since been returned to the vendor, the system on its own generates a credit memo for the returned quantity during the next MRRL run.

Master Data Setting

Vendor Master:

• Purchasing Data tab
  o GR-Based Inv. Verif.
  o AutoEvalGRSetmt Del.
  o AutoEvalGRSetmt Ret

Purchase Info Record:

ERS relevant settings can also be activated / deactivated in a purchase info record for a vendor material combination. The advantage of this setting at Purchase Info Record level is it allows you to prevent certain materials from a vendor as being not relevant for ERS. In other words, Purchase Info Record settings are considered first while defaulting data to a purchase order as compared to vendor master settings.

Output Conditions:

T Code - MRM1 (Create output – condition records: Invoice Verification)
o Output Type = ERS
In this step, you define the message types for ERS. The system can generate and possibly send a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing. The customizing path is as under:
SPRO>Materials Management> Logistics Invoice Verification> Message Determination > Maintain Conditions

In case re-messaging is required, it can be done using transaction code MR90.

Stock Determination during Goods Issue

Stock Determination
Automatic stock determination is useful if a similar material is sourced in multiple ways. In other words, when a special stock of a material exists (consignment stock) along with an unrestricted stock, it helps to determine which stock should be picked up first for Goods Issue.
For instance, a priority can be set that own stock is to be issued first and when it is completely consumed, vendor consignment stock can be issued. In such a case stock is directly issued from vendor consignment stock instead of a 2 step process of stock withdrawal and then issue. For example, movement type 201 K directly issues vendor consignment stock to production order cost center.

T Code : OSPX
Configuration Path: SPRO > Materials Management > Inventory Management and Physical Inventory > Stock Determination > Determine strategies for stock determination.

Master Data Setting:
In Material Master, MRP 2 view, maintain Stock Determination Group.

Configuration Setting:
Maintain Stock Determination Rule in movement type setting, T Code – OMJJ.

Physical Inventory

Physical Inventory Process

This process captures different ways of carrying out physical inventory count in a plant / storage location. Depending upon the number of materials and company’s inventory norms, a physical inventory procedure is adopted. Following two procedures are more commonly used in industry:

• Cycle Counting
• Periodic Inventory (usually Annual Inventory count)

In Annual physical inventory, all materials are counted once in a year on a pre-determined date. On this date, all materials are blocked for any inventory movement till the physical inventory count is complete. This is more common for Plant / Storage locations which do not hold too much inventory. For warehouses with a lot of inventory, this method tends to become impractical to implement.

In cycle counting, all materials need not be treated the same way. It allows fast moving materials to be counted more frequently than slow moving materials or high value items to be counted more frequently than low value items. A cycle counting indicator is set in material master which determines for a given plant, how frequently the material has to be counted, as in, once a year, twice a year, thrice a year and so on.

SAP process flow:
1. MI01 – Create Phsical inventory document : Initial screen
2. MI22 – Display Physical Inventory Documents for material
3. MI21 – Print physical inventory document
4. MI04 – Enter inventory count: Initial screen
5. MI20 – List of Inventory Differences
6. MI11 – Enter recount: Initial screen
7. MI22 – Display Physical Inventory Documents for material
8. MI21 – Print physical inventory document
9. MI04 – Enter inventory count: Initial screen
10. MI20 – List of Inventory Differences
11. MI07 – Post inv. Differences: Initial screen

While creating physical inventory document in Step 1, material can also be blocked for posting. Otherwise transaction MI32 can be used after Step 1 to block the materials.

Steps 6 to 10 above are optional. If re-count is required then only these steps need to be carried out. Step 11 creates a material document, which leads to updating of SAP book inventory. In other words Step 11 leads to write-on or write-off of inventory based on physical inventory count.

SAP also provides T Codes to automate the process carried out in Step 1. By these transactions Physical Inventory Documents can be created in background in batch processing mode. MI31 enables creation of Physical inventory documents in bulk based on selection parameters for Periodic Inventory Count. Similarly MICN enables bulk creation of physical inventory documents for Cycle Counting.

There is an alternate ways of processing inventory count, where inventory data can be entered without reference to any physical inventory document, as mentioned below:

• MI09 – Enter count w/o reference to document: Initial screen
• MI20 – List of Inventory Differences
• MI07 – Post inv. Differences: Initial screen

Master Data Setting – Cycle Counting

• In Material Master Plant data / stor. 1 view maintain the “CC phys. inv. Indicator”.
• MIBC – “ABC Analysis for Cycle Counting (Phys. Inv.) can be used to assign materials to different cycle counting categories viz. A, B, C and D. This transaction analyses the materials based on the configuration of category A, B, C and D and proposes / assigns a corresponding cycle counting indicator.
• If “CC fixed” indicator is checked in Material Master Plant data / stor. 1 view, “CC phys. inv. Indicator” cannot be changed by running MIBC.

Master Data Setting – Periodic Inventory

• In Material Master Plant data / stor. 1 view, “CC phys. inv. Indicator” should be blank.

The above two processes can also be used to count physical inventory of special stocks such as Consignment Material as well as different stock types like Quality Inspection Stock and Blocked stock.

To count physical inventory for say consignment material, maintain “K” in special stock field in the physical inventory document. To include different stock types like Quality Inspection Stock and Blocked stock in physical inventory process, you need to enter a new line for the same material in physical inventory document for each stock type.

Transfer Posting Scenarios

Stock Transfer from Quality Inspection (QI) to unrestricted use
T Code – MIGO
o Transfer Posting – Others - Movement Type = 321
o Enter Material, Quantity, Plant, Storage Location etc.
o Check and Post the document

Stock Transfer within a plant from one storage location to another
T Code – MIGO
o Transfer Posting – Others - Movement Type = 311
o Enter Material, Quantity, Plant, Storage Location etc.
o Check and Post the document

Goods Issue from Inventory to Cost Center (Manufacturing Consumption)
T Code – MIGO
o Transfer Posting – Others - Movement Type = 201
o Enter Production Order, Material, Quantity, Plant, Storage Location etc.
o Check and Post the document
NB – this can usually be posted if the material belongs to unrestricted use stock.

Normally the consignment material is a component in the Bill of Material (BOM) which goes into the manufacturing of the final/main product. This means that a consignment material is issued to a Production Order along with other components. Goods Issue documents are posted during confirmation of the Prod. Order (CO15).

Please note that the Item Category “K” has to be mentioned to notify that Consignment Material is issued. However, if the relevant Stock Determination Rule is maintained for that material, system will automatically pick the vendor consignment item.

SAP Procurement - Vendor Consignment

Vendor Consignment Stock
This is a special kind of stock which can be viewed under SAP inventory transaction MMBE but it belongs to the vendor. As per the need, the company withdraws stock from Vendor Consignment Stock, which results in change of ownership of stock. At this stage, the stock is valuated and a liability towards the vendor is raised.

When a consignment stock is received from the vendor, it can be designated as one of the following stock type:

• Unrestricted-use stock
• Quality inspection stock
• Blocked stock

Stock can be withdrawn from the Vendor Consignment Stock only if it is under Unrestricted-use stock.

SAP Transaction Flow:

• Create a Purchase Info Record for Material Vendor combination (ME11) with info category as consignment.
• Create a Purchase Order with Item Category as “K” for consignment item. This ensures that a Goods Receipt to this purchase order results in vendor consignment stock and an invoice can not be posted based on Goods Receipt alone. The net price of the PO is usually zero.
• Goods Receipt based on the purchase order. The stock can be either,
  1. Unrestricted-use stock
  2. Quality inspection stock
  3. Blocked stock
• Stock Withdrawal
  T Code – MIGO
  1. Transfer Posting – Others - Movement Type = 411
  2. Enter Material, Quantity, Vendor, Plant etc.
  3. Check and Post the document
• Stock Settlement
  Consignment settlement T Code – MRKO

Master Data Settings

• Special procurement type = 10 for consignment stock. This material master setting will result in a warning message when a purchase order is created without item category as “K”
• Purchase Info Record for a consignment purchase is mandatory. The price for vendor consignment stock is picked up from purchase info record.

Consignment Stock Reports

• MMBE – Stock Overview : Company Code / Plant / Storage Location / Batch
• MB54 – Display Consignment Stocks

Note:

• An alternate way to SAP transaction flow could be when Goods Receipt is made without reference to a purchase order using movement type 501 K.
• Material can also be issued to a cost center directly instead of a 2 step process of withdrawal and then issue to a cost center. The Movement type would be 201 K. Refer Goods Issue from Inventory to Cost Center (Manufacturing Consumption)
• An accounting document is generated only during stock withdrawal. The price is picked up from Consignment Info Record. During Goods Receipt no accounting document is generated.

Also see links:
Stock Determination
Stock transfer from Quality Inspection (QI) to unrestricted use

How to create New Movement Type

Inventory Management - New Movement Type

Transaction – OMJJ

Menu path – SPRO>Material Management> Inventory Management > Movement types > Copy, Change Movement types

SAP Configuration Steps

• Select a standard movement type which is very close to the requirement.
• Select the standard movement type and click on Copy
• Enter the new movement type to which it is to be copied. The new movement type should either be in 9** form or Z** form.
• Click on “Copy All” when a pop up window appears which says “the entry to be copied has dependant entries”.
• Update the entries in the “Details” screen and then maintain all the different views for a new movement type.
• Short texts – here you can maintain transaction short text for different languages.
• Allowed transactions – a list of transactions can be maintained which are allowed to post this movement type.
• Help texts – this text will be visible to the user when he presses F1 for help. It can be maintained in different languages.
• Field Selection – Over here required and optional entry fields can be maintained. The fields are grouped into logical groups like Account Assignment, Material Management etc. Based on the group, a desired field can be selected. This field can then be suppressed, made a required entry or an optional entry based on the radio button selection.
• Update Control – This is applicable is Warehouse Management is active. The settings in this tab provide the reference movement type for Warehouse Management.
• Account Grouping – In this screen you can maintain the account modification keys. The account modification key is to differentiate account determination for the goods movement. The values of this key are SAP predefined and cannot be changed.
• Reversal / follow on movement – Over here you can maintain the movement type for reversal movement. By Indicator type of posting in this screen, the system decides whether the quantity adopted from the reference document (which is getting reversed based on this movement type) may be changed or not.
• Reason for movement – Over here you can define which reasons are allowed while posting the mentioned movement type. This field is usually used to differentiate the different scenarios (for reporting purpose) in which the said movement type can be used. The movement type configuration for Field Selection can be used to determine if this is a mandatory or an optional field while posting the document.
• Deactivate QM inspection – By this setting you can configure the instances when this movement type is used and Quality Management is not active. As a result no inspection lots will be created for an inspection process.
• LIS statistics group – Over here different statistic groups can be maintained for different possibilities of this movement type.

Movement Type – Interface between WM and IM module

Steps:

• Idenfify the relevant warehouse management movement type which is to be linked with the given Inventory Management movement type. If an appropriate Warehouse Management movement type does not exist, you will have to create one.
• Maintain the link between the Inventory Management Movement type and Warehouse Management movement type.

Menu Path:
SPRO> Logistics Execution> Warehouse Management> Interfaces> Inventory Management> Define movement types
Select “Assign WM Movement Type References to IM Movement Types”

In this screen on the left all IM movement types are populated. For all these movement types a reference WM movement type is entered under column “Reference Movement type WM”. If a new IM movement type was created copying a standard movement type, the reference WM movement type will also get copied accordingly. In some cases it would be required then to change this reference movement type with some other movement type.

Note: this setting is required if warehouse management is active.